Planning a clutch replacement for your 2007–2011 Jeep Wrangler JK 3.8L V6 with a manual transmission? Along with choosing a clutch kit, you will need to consider the condition of the flywheel.

The LuK 01-046 clutch kit and LFW390 flywheel bundle brings these components together for one repair. Here is what Wrangler owners should know about compatibility, package contents and replacing the clutch and flywheel together.

Which Jeep Wrangler Models Does This Bundle Fit?

This bundle is intended for the following factory drivetrain applications:

Compatibility includes applicable Rubicon, Sahara, Sport and X models equipped with the listed engine and manual transmission.

The engine and transmission matter more than the trim name. A Rubicon with an automatic transmission does not use this clutch package. This bundle is also not intended for 2012-and-newer Wrangler models with the 3.6L engine.

If your Jeep has an engine or transmission swap, confirm compatibility using the installed drivetrain rather than the vehicle’s model year alone.

What Comes in the LuK Clutch and Flywheel Bundle?

The package combines the LuK 01-046 clutch kit with the LuK LFW390 solid flywheel.

Included components are:

• Clutch pressure plate

• Clutch disc

• Clutch release bearing, also called a throwout bearing

• Pilot bearing

• Clutch alignment tool

• New LuK LFW390 flywheel

The release bearing is part of the clutch release mechanism. It is a different component from the hydraulic slave cylinder; a slave cylinder is not listed in this bundle.

Why Does the Flywheel Matter During Clutch Replacement?

The clutch disc operates between the pressure plate and the flywheel. These parts work together to transfer engine power to the transmission.

Replacing the clutch disc does not correct wear or damage on the old flywheel. During clutch service, your installer should inspect the flywheel’s friction surface and check it against the applicable service specifications.

A new LFW390 flywheel provides a fresh mating surface for the replacement clutch. Buying the clutch and flywheel together also makes it easier to organize the main parts for the job.

Should You Replace the Flywheel Every Time?

The decision depends on the existing flywheel’s condition and the vehicle’s service requirements. A qualified installer should assess whether the old flywheel can remain in service or needs replacement.

For owners who have already decided to install a new flywheel, this bundle supplies both the clutch kit and flywheel in one purchase. It removes the need to select a separate flywheel after ordering the clutch.

What Should You Check Before Ordering?

Before purchasing, confirm these four details:

1. Your Wrangler is a 2007–2011 JK.

2. It has the 3.8L V6 engine.

3. It has a manual transmission.

4. The drivetrain remains in its original configuration, or compatibility has been checked for any modifications.

Use 01-046 and LFW390 as the part-number references when discussing the repair with your installer.

During installation, the technician should also inspect related components and follow the vehicle’s service procedures. Any leaking seals, worn release components or damaged hardware should be addressed as appropriate.

Why Buy Your Wrangler Clutch Bundle from SayParts?

At SayParts, this package brings the LuK clutch kit and flywheel together with clear part numbers and application details.

• One convenient bundle: Clutch components and a new flywheel in one order.

• Clearly identified parts: LuK 01-046 clutch kit and LFW390 flywheel.

• Useful fitment information: Compare your Jeep’s year, engine and transmission before purchasing.

• Free shipping: Shipping is included with your order.

Shop the LuK 01-046 Clutch Kit & LFW390 Flywheel for 2007–2011 Jeep Wrangler JK

Frequently Asked Questions

Does this kit fit a 2008 Jeep Wrangler Rubicon 3.8L?

It is intended for the 2008 Wrangler Rubicon with the 3.8L V6 and manual transmission. Confirm the drivetrain configuration before ordering.

Does it fit Wrangler Unlimited models?

Yes, applicable 2007–2011 Wrangler Unlimited JK models with the 3.8L V6 and manual transmission are included.

Is the flywheel included?

Yes. This bundle includes the LuK LFW390 flywheel alongside the LuK 01-046 clutch kit.

Is a throwout bearing included?

Yes. A clutch release bearing, also known as a throwout bearing, is included.

Does it fit a 2012 Wrangler 3.6L?

No. This bundle is listed for the 2007–2011 Wrangler JK 3.8L V6 manual application.

Is shipping free?

Yes. SayParts offers free shipping on this clutch and flywheel bundle.