Planning a Clutch Replacement for Your Ford Focus ST?
Before buying a replacement clutch, confirm which kit your vehicle needs and what your installer plans to replace.
The LuK 07-235 / 6243760340 RepSet Pro clutch kit combines the pressure plate, clutch disc, and hydraulic slave cylinder for compatible 2013–2018 Ford Focus ST 2.0L turbo manual transmission applications.
This guide explains the kit’s contents, compatibility checks, and what to consider before installation.
What Do the Two Part Numbers Mean?
You may find this kit listed under LuK 07-235 or 6243760340. These numbers are cross-referenced for the same application and help identify the product when comparing listings.
Confirm the part number together with your vehicle’s VIN, engine, and transmission details before ordering.
View the LuK 07-235 / 6243760340 Clutch Kit at SayParts.
What Is Included?
| Component | Included |
|---|---|
| Clutch pressure plate / cover assembly | Yes |
| Clutch disc | Yes |
| Hydraulic slave cylinder | Yes |
| Required pilot components and accessory pack | As specified for the application |
| Dual-mass flywheel | No |
Ordering the clutch and hydraulic components together helps your installer prepare when both are required for the repair.
Confirm the supplied package contents and any additional parts needed before scheduling the work.
Ford Focus ST Compatibility
| Vehicle | Model Years | Engine | Transmission |
|---|---|---|---|
| Ford Focus ST | 2013–2018 | 2.0L turbocharged four-cylinder | Compatible manual transmission |
This table describes the intended application. Your installer should still verify compatibility with your specific vehicle.
This is not the LuK 07-233 DPS6 automatic dual clutch kit. Do not select it for an automatic Focus, Focus RS, or another engine configuration without a separate application check.
What Is a Self-Adjusting Pressure Plate?
The kit uses a self-adjusting pressure plate designed to compensate for clutch wear during operation.
This design also makes the correct installation procedure important. Your installer should use the appropriate tools and follow the service instructions for the clutch and vehicle.
A self-adjusting design does not remove the need for inspection or correct fitting.
Do You Need a New Flywheel?
The dual-mass flywheel is not included in this kit.
Before installation, ask your technician to inspect the existing flywheel and determine whether it can remain in service or needs replacement. Follow the applicable service limits and repair procedures rather than assuming the flywheel is suitable because the clutch kit fits.
Discuss this before ordering so your repair shop can prepare all the required parts.
Diagnose the Problem Before Buying
Clutch slipping, difficulty shifting, or changes in pedal feel are reasons to have your vehicle inspected. These symptoms alone do not confirm which components need replacement.
Your technician should assess the clutch and hydraulic release system and establish the repair requirements. Choose the kit after confirming that it addresses the diagnosed problem.
Is This a Performance Upgrade?
Do not assume that a replacement clutch kit supports increased engine torque simply because it fits a Focus ST.
If your vehicle has an ECU tune or other modifications, discuss clutch requirements with your installer. This listing does not claim an increased torque rating or suitability for every modified setup.
Why Buy from SayParts?
Free shipping
Order the LuK 07-235 / 6243760340 kit with no additional shipping charge at checkout.
Clutch and slave cylinder together
Purchase the listed clutch and hydraulic components in one order.
Clear product information
Review both part numbers, the included components, and the transmission application before purchasing.
Compatibility assistance
Contact SayParts with your VIN and vehicle details if you need help checking the application.
Easy access to support
Use the Contact page or WhatsApp button on our website for product and order questions.
Prepare for Your Focus ST Clutch Repair
Once your installer confirms compatibility, review the kit contents and any additional components required for the job.
Shop the LuK 07-235 / 6243760340 Clutch Kit with Slave Cylinder and Free Shipping.