Regular oil changes are essential for protecting Volkswagen’s 2.5L inline-five gasoline engine. Using the correct oil specification, oil filter, sealing components, and fill quantity helps maintain lubrication, control deposits, and protect internal engine components.
This guide covers select Volkswagen Jetta, Rabbit, Golf, Beetle, Jetta SportWagen, and Passat models equipped with BGP, BGQ, CBUA, or CBTA 2.5L engines.
Compatible Volkswagen Models
The Liqui Moly 5W-40 Volkswagen 2.5L Oil Change Kit is intended for the following applications:
| Year | Model | Engine | Fuel |
|---|---|---|---|
| 2005–2007 | Volkswagen Jetta | 2.5L Inline-5 – BGP or BGQ | Gasoline |
| 2006–2009 | Volkswagen Rabbit | 2.5L Inline-5 – BGP, BGQ, CBUA or CBTA | Gasoline |
| 2008–2014 | Volkswagen Jetta | 2.5L Inline-5 – CBUA or CBTA | Gasoline |
| 2009–2014 | Volkswagen Jetta SportWagen | 2.5L Inline-5 – CBUA or CBTA | Gasoline |
| 2010–2014 | Volkswagen Golf | 2.5L Inline-5 – CBUA or CBTA | Gasoline |
| 2012–2014 | Volkswagen Beetle | 2.5L Inline-5 – CBUA or CBTA | Gasoline |
| 2012–2014 | Volkswagen Passat | 2.5L Inline-5 – CBUA or CBTA | Gasoline |
Why Use Liqui Moly Leichtlauf High Tech 5W-40?
Liqui Moly Leichtlauf High Tech 5W-40 is designed to provide stable lubrication during cold starts, normal commuting, highway driving, and higher-temperature operation.
Its VW 502 00 specification makes it suitable for the gasoline-powered Volkswagen applications covered by this guide. The oil is also formulated for use with turbochargers and catalytic converters, although this specific kit is intended for naturally aspirated 2.5L engines.
Why the Hengst Filter Matters
The included Hengst E27H D125 is a cartridge-style engine oil filter corresponding to OE reference 06D 115 562. It includes the required filter-housing sealing ring.
A new sealing ring should be installed during every oil service. Reusing a hardened or damaged seal can result in leakage around the filter housing.
What Does the Kit Include?
- Six liters of Liqui Moly Leichtlauf High Tech 5W-40
- Hengst E27H D125 oil filter
- Oil-filter housing seal
- Replacement engine-oil drain plug
- Drain-plug crush washer
General Oil Change Procedure
- Warm the engine slightly and park the vehicle on a level surface.
- Open the hood and remove the oil filler cap.
- Safely raise and support the vehicle if required.
- Position a suitable drain pan beneath the engine.
- Remove the old drain plug and allow the oil to drain completely.
- Remove the filter housing and used cartridge filter.
- Replace the filter and sealing ring.
- Lightly lubricate the new sealing ring with fresh engine oil.
- Install the new drain plug and washer.
- Add approximately five liters of fresh oil.
- Start the engine briefly and inspect for leaks.
- Switch off the engine and allow the oil to settle.
- Check the level and add oil gradually as required.
- Reset the oil-service reminder when applicable.
Do not automatically add all six liters. The final fill quantity may vary depending on how completely the old oil drained and the exact vehicle configuration.
Confirm Fitment Before Ordering
Before purchasing, confirm that:
- Your vehicle has a 2.5L inline-five gasoline engine.
- The engine code is BGP, BGQ, CBUA, or CBTA.
- The engine requires VW 502 00-compatible oil.
- The filter cross-references to 06D 115 562.
- Your model year appears in the fitment table.
Order the complete Liqui Moly 5W-40 VW 2.5L oil change kit with Hengst filter from SayParts.