Volkswagen’s 2.0T FSI EA113 engine requires the correct oil specification, cartridge filter, and sealing components to maintain reliable lubrication and turbocharger protection.
This guide covers select Volkswagen GTI, Golf R, Jetta GLI, Eos, and Passat applications using the BPY or CRZA engine and the 06D 115 562 cartridge-style oil filter.
Compatible Volkswagen Models
The VW GTI, Golf R and Jetta 2.0T FSI Molygen Oil Change Kit supports these applications:
| Year | Model | Engine | Fuel |
|---|---|---|---|
| 2007–2008 | Volkswagen Eos | 2.0L FSI – BPY | Gasoline |
| 2012–2013 | Volkswagen Golf R | 2.0L FSI – CRZA | Gasoline |
| 2006–2008 | Volkswagen GTI | 2.0L FSI – BPY | Gasoline |
| 2006–2008 | Volkswagen Jetta / GLI | 2.0L FSI – BPY | Gasoline |
| 2006–2008 | Volkswagen Passat | 2.0L FSI – BPY | Gasoline |
Why Use Liqui Moly Molygen 5W-40?
Liqui Moly Molygen New Generation 5W-40 combines a high-performance engine-oil formulation with friction-reducing additive technology.
It is designed to support:
- Reliable lubrication during cold starts
- Stable protection at operating temperature
- Turbocharger lubrication
- Reduced friction between internal engine components
- Engine cleanliness
- Resistance to oxidation and oil aging
Its fluorescent green color can also assist with leak detection when inspected using appropriate lighting.
Why the 06D 115 562 Filter Matters
The EA113 2.0T FSI engine uses a cartridge-style oil filter. This kit includes the Hengst E27H D125 filter and required filter-housing sealing ring.
The filter corresponds to OE reference 06D 115 562. This is different from the spin-on filter used by many later 2.0T TSI engines.
Because certain Volkswagen model years transitioned between FSI and TSI engines, the model year alone should not be used to determine fitment.
What’s Included?
- Five liters of Liqui Moly Molygen New Generation 5W-40
- Hengst E27H D125 cartridge filter
- Oil-filter housing sealing ring
- Replacement engine-oil drain plug
- Drain-plug sealing washer
General Oil Change Procedure
- Warm the engine slightly and park on a level surface.
- Remove the oil filler cap.
- Safely raise and support the vehicle if required.
- Position a suitable drain pan underneath the engine.
- Remove the old drain plug and drain the used oil.
- Remove the oil-filter housing and old cartridge filter.
- Replace the filter and housing seal.
- Lightly lubricate the new seal with fresh oil.
- Install the filter housing according to the vehicle’s service procedure.
- Install the replacement drain plug and sealing washer.
- Add the initial quantity of fresh Molygen 5W-40.
- Start the engine briefly and inspect for leaks.
- Switch off the engine and allow the oil to settle.
- Verify the final oil level and add oil gradually when necessary.
- Reset the oil-service reminder if applicable.
Confirm Fitment Before Ordering
Confirm that:
- Your vehicle appears in the fitment table.
- The engine code is BPY or CRZA.
- The engine uses VW 502 00-compatible oil.
- The existing filter is a cartridge design.
- The filter cross-references to 06D 115 562.
Order the complete Liqui Moly Molygen 5W-40 Volkswagen 2.0T FSI oil change kit from SayParts.