Volkswagen MK7 GTI, Golf R, SportWagen and Alltrack 5W-40 Oil Change Guid

Regular engine oil service is one of the most important maintenance procedures for Volkswagen’s turbocharged EA888 engines. The MK7 GTI, Golf R, Golf SportWagen, and Golf Alltrack place significant thermal and mechanical demands on their engine oil, making the correct lubricant, filter, and service procedure especially important.

This guide explains which vehicles use this service package, what is included, and why Liqui Moly Molygen 5W-40 is a strong option for Volkswagen owners whose vehicles call for a compatible VW 502 00 oil.

Which Volkswagen Models Does This Kit Fit?

The Liqui Moly Molygen 5W-40 Volkswagen Oil Change Kit is designed for select North American Volkswagen MQB-platform vehicles equipped with turbocharged EA888 Gen 3 gasoline engines.

Always verify the engine oil specification and filter reference for your exact vehicle before beginning service.

Why Use Liqui Moly Molygen 5W-40?

Liqui Moly Molygen New Generation 5W-40 is formulated for modern gasoline engines operating under demanding conditions. Its friction-reducing additive technology is designed to support wear protection, smooth operation, and stable lubrication across a wide operating-temperature range.

The oil is recommended for applications requiring specifications that include ACEA A3/B4, BMW Longlife-01, MB 229.5, Porsche A40, VW 502 00, and VW 505 00.

Its fluorescent green color can also assist with leak detection when the engine is inspected using appropriate lighting.

Why the Oil Filter Matters

Clean engine oil cannot provide its full protective benefit if it circulates through an incorrect or poor-quality filter. This service kit includes a Hengst E358H03 D246 cartridge filter with the required sealing ring.

The filter corresponds with common Volkswagen references 06K 115 562 and 06L 115 562 B and is designed for the 1.8 TSI and 2.0 TSI applications covered by this kit.

What Comes in the Kit?

The complete maintenance package includes:

• Six liters of Liqui Moly Molygen New Generation SAE 5W-40

• Hengst E358H03 D246 engine oil filter

• Oil filter sealing ring

• Replacement M14×1.5×22 engine oil drain plug

Purchasing these components together helps prevent mismatched oil, filter, and drain-plug selections.

Basic Oil Change Preparation

Before starting the service, gather the correct tools, protective gloves, a suitable drain pan, shop towels, and an approved container for recycling the used oil.

The engine should be warm enough to allow the oil to drain efficiently but not hot enough to create a burn hazard. Keep the vehicle level and support it safely before working underneath it.

General Oil Change Procedure

1. Open the hood and remove the oil filler cap.

2. Safely raise and support the vehicle if underbody access is required.

3. Position a drain pan beneath the engine oil drain point.

4. Remove the old drain plug and allow the used oil to drain completely.

5. Remove the old oil filter and its sealing ring.

6. Install the new sealing ring in the correct groove and lightly lubricate it with fresh oil.

7. Install the new Hengst filter according to the vehicle’s service procedure.

8. Install the replacement drain plug and tighten it to the manufacturer’s specification.

9. Add the initial quantity of fresh Molygen 5W-40 oil.

10. Start the engine briefly and inspect the filter housing and drain plug for leaks.

11. Switch off the engine, allow the oil to settle, and verify the final level.

12. Reset the oil service reminder if required.

Do not automatically pour all six liters into the engine. The kit supplies enough oil for the listed applications, but the precise fill quantity varies by engine, model, and draining conditions.

How Often Should the Oil Be Changed?

The correct service interval depends on the manufacturer’s schedule, driving environment, trip length, engine condition, and vehicle use.

Vehicles exposed to frequent short journeys, heavy traffic, high temperatures, performance driving, or repeated cold starts may benefit from more frequent servicing than the maximum factory interval. Always follow the maintenance schedule applicable to your specific vehicle.

Final Fitment Check

Before ordering, confirm:

• Your Volkswagen appears in the fitment table.

• The engine is a compatible 1.8 TSI or 2.0 TSI gasoline application.

• The vehicle requires a compatible VW 502 00 5W-40 oil.

• The oil filter cross-references to 06K 115 562 or 06L 115 562 B.

• The vehicle uses the included drain-plug type.

Ready for your next service? Order the complete Liqui Moly Molygen 5W-40 VW oil change kit with Hengst filter from SayParts.